|
GAS SAFE REGISTER |
|
|
APHC |
HVCA |
|
CORGI |
IPHE |
|
IDHEE |
CIBSE |
|
OFTEC |
SNIPEF |
Ventilation Air Movement
-
Smoke Stick™ Kit 6 (c/w Smoke Pen dispenser)
33110
The Smoke Stick™ Kit6 contains a pack of 6 Smoke Sticks™ plus a Smoke Pen (Smoke Wand) dispenser
- Use for checking the integrity of positive and negative boiler case seals
- Provides pencil thin smoke pattern showing the slightest air movement
- Can also be used for other HVAC air movement test applications
- Each pack provides over 3 hours of smoke allowing over 600 tests
- First product on the market offering pencil - thin smoke pattern
- Ideal for testing for the slightest air-movement, gas spillage
- For mandatory CO spillage checks of boiler/case sills after fitting/re-fitting
- HVAC air-movement/leakage checksOffers over 3 hours of smoke (stop/re-start usage)
- Non-corrosive, not harmful
"Update to procedures under BS 5440-1:2000 Installation & Maintenance of flues and ventilation for gas appliances of rated input not exceeding 70kW
One of the reasons for reproducing this procedure at this time is that the Health and Safety Executive (HSE) has advised CORGI that a smoke producing device/wand is now available that produces a steady thin stream of smoke which can be used instead of a lighted taper/match and this would be the preferred method to be used."
Please see 'spec sheet' for the full article 'Testing Appliances with Positive Pressure Cases' published in the January 2006 Corgi Installer magazine -
Smoke Stick™ Kit 3 (c/w Smoke Pen dispenser)
33113
The Smoke Stick™ Kit contains a pack of 3 Smoke Sticks™ plus a Smoke Pen (Smoke Wand) dispenser
- Use for checking the integrity of positive and negative boiler case seals
- Provides pencil thin smoke pattern showing the slightest air movement
- Can also be used for other HVAC air movement test applications
- Each pack provides over 1 ½ hours of smoke allowing over 300 tests
- First product on the market offering pencil - thin smoke pattern
- Ideal for testing for the slightest air-movement, gas spillage
- For mandatory CO spillage checks of boiler/case sills after fitting/re-fitting
- HVAC air-movement/leakage checks
- Offers over 3 hours of smoke (stop/re-start usage)
- Non-corrosive, not harmful
"Update to procedures under BS 5440-1:2000 Installation & Maintenance of flues and ventilation for gas appliances of rated input not exceeding 70kW
One of the reasons for reproducing this procedure at this time is that the Health and Safety Executive (HSE) has advised CORGI that a smoke producing device/wand is now available that produces a steady thin stream of smoke which can be used instead of a lighted taper/match and this would be the preferred method to be used."
Please see 'spec sheet' for the full article 'Testing Appliances with Positive Pressure Cases' published in the January 2006 Corgi Installer magazine -
Smoke Stick™ Refill Pack 3
33103
Smoke Stick™ Refill contains 3 Smoke Sticks™
- Use for checking the integrity of positive and negative boiler case seals
- Provides pencil thin smoke pattern showing the slightest air movement
- Can also be used for other HVAC air movement test applications
- Each pack provides over 1 ½ hours of smoke allowing over 300 tests
- First product on the market offering pencil - thin smoke pattern
- Ideal for testing for the slightest air-movement, gas spillage
- For mandatory CO spillage checks of boiler/case sills after fitting/re-fitting
- HVAC air-movement/leakage checks
- Offers over 3 hours of smoke (stop/re-start usage)
- Non-corrosive, not harmful
"Update to procedures under BS 5440-1:2000 Installation & Maintenance of flues and ventilation for gas appliances of rated input not exceeding 70kW
One of the reasons for reproducing this procedure at this time is that the Health and Safety Executive (HSE) has advised CORGI that a smoke producing device/wand is now available that produces a steady thin stream of smoke which can be used instead of a lighted taper/match and this would be the preferred method to be used."
Please see 'spec sheet' for the full article 'Testing Appliances with Positive Pressure Cases' published in the January 2006 Corgi Installer magazine -
Smoke Stick™ Refill Pack 6
33100
Smoke Stick™ Refill Pack of 6 Smoke Sticks™ (or smoke wand)
- Use for checking the integrity of positive and negative boiler case seals
- Provides pencil thin smoke pattern showing the slightest air movement
- Can also be used for other HVAC air movement test applications
- Each pack provides over 3 hours of smoke allowing over 600 tests
- First product on the market offering pencil - thin smoke pattern
- Ideal for testing for the slightest air-movement, gas spillage
- For mandatory CO spillage checks of boiler/case sills after fitting/re-fitting
- HVAC air-movement/leakage checks
- Offers over 3 hours of smoke (stop/re-start usage)
- Non-corrosive, not harmful
"Update to procedures under BS 5440-1:2000 Installation & Maintenance of flues and ventilation for gas appliances of rated input not exceeding 70kW
One of the reasons for reproducing this procedure at this time is that the Health and Safety Executive (HSE) has advised CORGI that a smoke producing device/wand is now available that produces a steady thin stream of smoke which can be used instead of a lighted taper/match and this would be the preferred method to be used."
Please see 'spec sheet' for the full article 'Testing Appliances with Positive Pressure Cases' published in the January 2006 Corgi Installer magazine -
Strikes Smoke Matches Tub of 25
33000
Hayes UK Strikes Smoke Matches- Grey/white smoke used for air flow and spillage testing of gas appliances
- As used by British Gas
- 20 second burntime
- 0.75m3 of dense smoke
- Clean to use, no residue
- Cool to touch after burning
- Packed in protective re-sealable tubs
- Tubs protect against damp and damage for less wastage
- Tub of 25
Used for testing:
Smoke Alarms, Air Filters, Fume Hoods, Air Balancing, Fans, Photography, Special Effects and much more.
